2026, Vol. 7, Issue 1, Part A
Design and analysis of low-pass active filters using operational amplifiers
Author(s): Jean-Pierre Dubois, Marie-Claire Fontaine, Antoine Moreau and Sophie Laurent
Abstract: Low-pass active filters represent fundamental building blocks in modern analog signal processing systems. This research presents a comprehensive investigation into the design, simulation, and performance evaluation of second-order low-pass active filters employing operational amplifiers as the primary active elements. The Sallen-Key topology was selected for implementation due to its simplified component count and favorable sensitivity characteristics [1]. A cutoff frequency of 1.2 kHz with unity passband gain was targeted for audio frequency applications. SPICE-based simulations were conducted using industry-standard TL072 operational amplifiers to validate the theoretical transfer function predictions [2]. The filter demonstrated a measured cutoff frequency of 1.183 kHz, representing a deviation of merely 1.42% from theoretical calculations. Total harmonic distortion remained below 0.37% across the passband frequency range, confirming excellent linearity performance. Phase margin measurements indicated adequate stability with values exceeding 52 degrees under all tested load conditions [3]. Component sensitivity analysis revealed that capacitor tolerances exhibited the most significant impact on frequency response accuracy. Temperature stability testing over the range of 15°C to 45°C showed frequency drift of less than 2.8%, meeting commercial grade specifications. The research findings validate the suitability of operational amplifier-based active filters for precision audio and instrumentation applications requiring predictable frequency domain characteristics [4].
DOI: 10.22271/27084531.2026.v7.i1a.115
Pages: 50-54 | Views: 24 | Downloads: 14
Download Full Article: Click Here
How to cite this article:
Jean-Pierre Dubois, Marie-Claire Fontaine, Antoine Moreau, Sophie Laurent. Design and analysis of low-pass active filters using operational amplifiers. Int J Res Circuits Devices Syst 2026;7(1):50-54. DOI: 10.22271/27084531.2026.v7.i1a.115
